EMV Tutorial How To Encode A Blank Card 2023 (Updated) From Mr.Tom

[Mr.Tom]

If that is entered, enter the​

AID into "AID" tab, which is basically data that regonizes which bank is issued. If you don't​

know what AID you need look in my channel, i posted a full list there. For now i will use​

31010 as this the standard aid for visa. Enter the pin into the "Pin" tab, the pin should be​

given with the track information. Do the same for the tabs "Country Code" and "Currency"​

which lists are also posted in my channel. For both these tabs i will use 0840 which is the​

code for both the United States and USD. Now click "Credit" at the bottom of the tab and for​

it to give the pop-up "Completed job!". After all that is done, select the "IST LOAD" tab at the​

top.​

​

8. Here select, "Open..." this will let you select a IST. file out of your files. Select the IST. file​

corresponding to your bin number, if you don't have the ist you are looking for i would​

recommend looking at my full IST list which is for sale in my channel. After that, enter the​

track2 into the "Track 2" tab and do the same for the cardholders name, application label,​

country code and currency. It's just a matter of copy & pasting.​

​

9. Don't close X2a yet, open ARQC Gen. Enter your card number into the "Pan (Card​

number)" tab and select the country code and currency code corresponding to your​

information into the "Country Code" and "Currency Code" lists. Enter the expiration date like​

you did before in step 7 into the tab "Date (YYMMDD)" and select "Generate ARQC". There​

now should be a combination of numbers and letters in the "ARQC" tab, copy & paste this​

into "ARQC 1" tab in the X2a pogram. Double check if all is gone correctly. if all is good,​

select "Burn" and wait for the "Completed Job!" pop-up. You're now done with X2a and​

ARQC Gen, you have succesfully written the chip of the card. Exit both programs.​

​

10. (Optional but recommended) Open Cardpeek and select "EMV" on the option "Analyzer"​

at the top. The program will now scan the card from your omnikey device. A couple pop-ups​

might come up, select "Yes" for all. The loading process should take around 5 minutes, if this​

is not case something might has gone wrong. After the loading as been done there should​

be a lot of data showing on your cardpeek program. I recommend going through it globally​

and picking out the important parts like "Usable at atm" to see if everything is okay. Once​

you're done with that and all is good, you can exit Cardpeek. YOU have succesfully swiped a​

card!​

​

To Purchase EMV Software Telegram https://t.me/Emvclub​